 |
Godlyke / Power - All |
| Product |
Details |
| GDPA-9D |
Godlyke PA-9D Power-All System
Product Clearance stock - Limited numbers
|
Product Clearance stock - Limited numbers
Product Clearance stock - Limited numbers |
Product Clearance stock - Limited numbers
DESIGNED TO MEET ALL YOUR POWER NEEDS FROM A SINGLE POWER SUPPLY
The PA-9 Power-All is the world's first 2000 mA, single outlet power supply designed specifically for
guitar effect users. Don't waste money on batteries or take up valuable space with multiple ''wall wart'' adaptors or
''power bricks'' the Power-All system can power your entire pedalboard from a single power supply that takes up only one outlet!
The Power-All Deluxe Kit provides 9 volts DC at 2000 milliamps - more than enough current to power dozens of effect pedals,
including up to 4 Line 6 Modelers! The Power-All Deluxe Kit can power eleven pedals out of the box, and comes complete with
a variety of jumper cables that allow connection of phone plug, reverse polarity, digital, and battery-only pedal types.
New Ten-Foot, 18-gauge output cable allows for longer power runs without the need for an extension cord.
The Power-All's special circuit design offers the lowest noise floor of any digital power supply on the market.
The PA-9 now comes with a ferrite-core filter built onto its output cable to further reduce noise and hum. The PA-9
automatically converts any input voltage to 9 VDC, allowing it to be used anywhere around the world!
Built to stand the rigors of the road, the Power-All features professional-grade construction and comes with a
lifetime warranty, if anything ever goes wrong, simply contact the manufacturer and they'll replace the unit FOR FREE!.
The PA-9D Power-All Deluxe Kit features: :
- Power-All 9 VDC, 2000 milliamp digital power supply
- LIFETIME WARRANTY - never buy another power supply!
- Power all your pedals from a single power supply
- Takes up only one outlet space
- Replaces Boss PSA-120, DOD PS-200R, Morley 9V, DanElectro DA-1, Dunlop ECB-003, Ibanez AC-
109, Guyatone AC-2, Maxon AC210N, Zoom AD-0006 and just about any other 9 VDC power adaptor
- Special, low-noise circuitry reduces ripple current and hum
- Ferrite-core filter module on power output cable reduces noise and hum
- Powers 9 VDC effects from any electrical outlet in the world
- 10-foot power cable eliminates need for an extension cord
- Cable-11/R eleven-connector right-angle Daisy Chain with spring-loaded jacks for extra secure
connections, no more losing power mid-solo!
- (1) Cable-Blue/R right-angle 3.5 mm Phone Plug Jumper Cable for use with EH and other vintage
pedals
- (1) Cable-Green Line-6 Jumper Cable with spring loaded jack for use with Line 6 Modelers and other
pedals requiring a 2.5 mm internal diameter jack
- (1) Cable-Green/R right-angle Line-6 Jumper Cable
- (1) Cable-Grey Battery Clip Jumper Cables for pedals with no AC input
- (1) Cable-Red/R right-angle Reverse Polarity Jumper Cable with spring-loaded jack for powering tip
positive pedals
- (5) Cable Cap insulator sheaths to cover power leads when not in use
Product Clearance stock - Limited numbers
|
| GDPA3.5PP |
Power-All 3.5mm Phone Plug Jumper Cable |
 |
Included in the Power-All System and also sold separately,
the Cable-Blue allows users to power effect units that use a 1/8" phone plug connector with tip-positive polarity.
The Cable-Blue can be connected to any jack on the Cable-5 Daisy Chain or directly to the PA-9 itself.
Note that to achieve tip-negative polarity from the Cable-Blue, simply attach a Cable-Red in between it and the power source. |
| GDPA5D |
Power-All 5 Connector Daisy Chain Cable |
 |
Daisy Chain connector with standard polarity tip negative/barrel positive jacks connects the PA-9 Power-All to five 9-volt effect pedals.
The CABLE-5 can also be used with Power-All adaptor cables to power effects that use different style jacks
(reverse polarity, phone plug, battery clip, etc.).
Link multiple CABLE-5 connectors to power over twenty 9-volt effect pedals or similar devices
(actual number of units depends on current draw of individual units used).
Jacks (5): Diameter 5.5 mm external, 2.1 mm internal. Barrel length: 22 mm.
Spring-loaded male jacks prevent disconnection from power source or pedal.
|
| GDPABC |
Power-All Battery Clip Cable |
 |
Included in the PA-9 Power-All System and also sold separately,
the Cable-Grey allows the user to power vintage and boutique effect units that do not have an external AC power jack.
The Cable-Grey hooks directly to the unit's Battery Clip and can be connected to any jack on the Cable-5 Daisy Chain or directly to the PA-9 itself.
|
| GDPAIC |
Power-All Isolation Caps for Barrel Plugs |
 |
Designed to fit over unused male barrel connectors on a daisy chain or power supply,
Cable-Caps protect against short circuits that can occur when a live lead touches a metal surface.
Sold in sets of three. Fits over standard 5.5 mm diameter barrel connectors.
|
| GDPAL-6 |
Power-All Line-6 Jumper Cable |
 |
Included in the Power-All system and also sold separately,
the Cable-Green allows the user to power Line-6 Stomp-Box modelers from the PA-9.
The Cable-Green features a reverse-polarity barrel connector with a larger internal
diameter designed specifically for use w/Line-6 Modelers.
the Cable-Green can be connected to any jack on the Cable-5 Daisy Chain or directly to the PA-9 itself
(note that the PA-9 can power up to three Line-6 Modelers while still having power remaining for other effect units). |
| GDPARAEX |
Power-All Right Angle Extension Jumper Cable |
 |
Included in the Power-All System and also sold separately,
the Cable-Black/R allows the user to power over-sized effect units or
units w/AC jacks in hard-to-reach places off of the Power-All Daisy Chain.
The Cable-Black features a tip-negative, male barrel connector with spring-loaded jack.
The Cable-Black/R is 270 mm long from jack to jack and can be connected to any jack on the Cable-5 Daisy Chain,
the Cable-Y splitter, or directly to the PA-9 itself. |
GDPASRP |
Power-All Straight Reverse Polarity Jumper Cable |
 |
Included in the Power-All System and also available separately,
the Cable-Red allows the user to power effect units that have reverse polarity barrel connectors
(tip positive/barrel negative).
The Cable-Red can be hooked to any jack on the Cable-5 daisy chain or directly to the PA-9 itself. |
GDPASTEX |
Power-All Straight Extension Jumper Cable |
 |
Included in the Power-All System and also sold separately,
the Cable-Black allows users to power over-sized effect units or units w/AC jacks in hard-to-reach places.
The Cable-Black is 21 cm long from jack to jack and can be connected to any jack on the Cable-5 Daisy Chain or directly to the PA-9 itself. |
| GDPAYS |
Power-All Y Splitter Cable |
Please Note - This product is now Yellow in colour, both cable and plugs. |
Y-SPLITTER CABLE WITH 5.5 MM Standard Polarity TIP Negative/Barrel posative male pring-loaded jacks.
The cable-Y allows you to power two effect pedals off one PA-9 OR
one lead of the cable-5 daisy chain.
This allows for chaining of additional effects without the need for a second daisy chain cable
(actual number of units capable of being powered will depend on current draw of individual units used).
Jacks ( spring-loaded x 2): 5.5 mm External diameter, 2.1 mm Internal diameter, 10 mm barrel length
cable length :155 mm (To split), 268 mm total. |
| GDUTA-1 |
Godlyke UTA-1 Universal Travel Adaptor |
 |
The UTA-1 Universal Travel Adaptor allows you to safely connect your electrical devices to any outlet type worldwide.
The UTA-1s modular design features a main base socket (pictured) that accepts input from any plug type.
The base unit can be fitted with any of 9 interchangeable plug inserts that come included with the kit
(UK-plug insert pictured).
The UTA-1 is the perfect accessory for the busy traveler who needs to conserve space and comes
complete with a zippered nylon storage case for travel.
Use in conjunction with the PA-9 Power-All system to power your effects and accessories anywhere in the world!
(Note: the UTA-1 does convert voltage, only plug type.) |
