 |
AMT Electronics |
Product |
Details |
| AMTBC1 |
AMT Bass Crunch Preamp |
|
AMT Electronics is happy to present its new product - 2-channel preamp for bass guitar - AMT Bass crunch BC-1.
The preamp has been built on the basis of the custom technology by AMT using JFET emulation of the vacuum tube
range clipping. The wide adjustment range in combination with rich functional possibilities that can only be found
in a stomp box have considerably increased the preamp versatility.
Bass crunch BC-1 preamp is based on a two-channel circuit.
CLEAN channel shapes the classic bass guitar sound characteristic for old amplifiers and allows both velvet
transparent sound and slight compressed overdrive depending on the position of Gain control.
DRIVE channel contains a number of over amplification stages and is intended for obtaining the modern sound
from clean to totally overdriven one. The High Mode provides additional possibilities in terms of the range enrichment
towards higher sound density and aggressiveness. The adjustable 3-position mid-range filter combined with deep adjustments
along the frequency ranges offer a musician its rich possibilities related to shaping of the overdriven tone range.
Controls:
Clean
Level - output signal level adjustment
High - high frequencies adjustment
Mid - middle frequencies adjustment
Low - low frequencies adjustment
Gain - channel sensitivity adjustment
Drive
Level - output signal level adjustment
High - high frequencies adjustment
Mid - middle frequencies adjustment by means of rejecter filter Freq. notch
Freq. notch - cutout frequencies switch (rejecter filter) 500Hz, 330Hz, 230Hz.
Low - low frequencies adjustment
Pre. Notch - rejecter filter switch before Drive stage. 700Hz, 400Hz.
Gain - channel sensitivity adjustment
Overall Controls
Blend - signal level balance adjustment between channels Clean and Drive
Master volume - BC-1's overall output level adjustment.
Footswitch DRIVE - Drive channel on/off
Led - Drive channel on indicator
Footswitch HI/LO - Drive channel increased sensitivity on/off.
Led - HI/LO mode with Drive channel increased sensitivity on indicator.
Connections
Right Panel
INPUT - instrument input of the preamp
SEND FX - signal send to aux effect
RETURN FX - aux effect signal return
Left Panel
OUTPUT - direct output to power amp.
CTRL OUT - AMT TS-2MIDI aux convertors control output
CAB.SIM. - direct output to mixer's line input.
DI OUT - balanced output intended for connection of devices equipped with balanced inputs.
Power
DC 18V - for connection of power adapter
Battery compartment - for two 9V batteries installation.
|
| AMTSLB |
AMT Slap Bass (Bass overdrive) |
|
The Slap Bass is a specialized effect designed by professional bass guitar player requests.
This pedal is a must for the musicians who use spectacular and popular funk and slap techniques which demands specific snappy attack.
AMT Slap Bass will give you a chance to expand your instrument sound range giving it more depth and compression.
Musicians playing hard and heavy use Slap Bass as bass distortion with adjustable drive level.
Also an amazing tool for guitar players looking to plug direct into their recorder to lay down that perfect, quick and easy bass track.
All AMT pedals are designed to sound equally as good through an amp or direct recorded due to built-in cabinet emulation circuitry.
Perfect for live performance and in the studio. You must try one to believe it.
The first time you plug one in, you will be instantly addicted to the "AMT Tone".
Technical Information:
Size: 112mm (4.4'') x 72mm (2.8'') x90mm (3.5'')
Weight: 420g (14.8 oz)
Control: Level, Low, High, Drive
Jacks: IN, OUT
Power: DC 9V, 9V Battery or PSA (-) center Adapter
|
|
